Toslink and USB connections both work without any drop outs. Not sure if it’s the Toslink connector on the two Sabre Dac’s or just my specific TV or LG C7’s in general that don’t work well with Sabre chips, but both units with those chips have produced the same results whether plugged into TV/Xbox/PS4 through Toslink.įifth Purchase: Cambridge Audio DacMagic Plus (Wolfson Dac, bought this specifically to test if I’d have any drop outs via Toslink). USB doesn’t cut out, no discernible difference in sound when switching inputs (to me). But after 6 months or so unit failed to turn on.įourth Purchase: Topping D50 Dac (Sabre Dac): Toslink connection sound cuts out every 10-15 seconds after 5-10 minutes. Can’t tell any difference in sound between either input. Third Purchase: Breeze Audio Dac (Chi-Fi, AK4490): Toslink and USB connections both work without error. Second Purchase: FX Audio X6 Dac/Amp (Cirrus Logic):Toslink and USB connections both work without error. I currently have 4 Dacs/Dac Amps and the DacMagic is the only one I’ve heard such a big difference from using different inputs.įirst purchase: Aune X7S Dac/Amp (Sabre Dac) Toslink connection sound cuts out every 10-15 seconds after 5-10 minutes. I’ll put in my purchase/performance history to see if that sheds any light. USB output is via PC, Toslink is from my TV through HDMI (LG C7) via PC/Xbox/PS4. USB Class is selected by turning the Volume knob, once set simply press the Volume knob and DacMagic Plus will restart in your chosen mode. One of the digital input source LEDs will illuminate to indicate current USB setting: Digital 1 represents USB Audio Class 1.0, likewise Digital 2 is USB Audio Class 2.0. To change USB Class, press in the ‘Filter/ Phase’ button during power up. Your DacMagic Plus will come set to driverless USB Audio Class 1.0 by default, but it can be configured to run in either USB Class Audio 1.0 or 2.0 mode. Switching between USB Class 1 and USB Class 2 operation In particular our free Windows USB Audio 2.0 driver (available from our website) supports up to 24-bit/192kHz audio and WASPI Exclusive or ASIO modes that can give enhanced performance.Ī brief explanation of your choices is below: With careful choice of playback software and settings many pitfalls can be avoided. See our online guide at on USB Audio for more details on this. However in some Windows/Mac operating system variants the operating system itself may restrict or fix the output sample rate or re-sample the audio. In this configuration the DacMagic Plus is able to work at up to 24-bit/96kHz by declaring to your computer that it can handle any sample rate from 32kHz to 96kHz. The default configuration is USB 1.1 and USB Audio 1.0 which works with nearly all common operating systems and computer types without drivers and supports up to 24-bit/96kHz audio, simply plug in and play. The DacMagic Plus also supports two USB Audio protocols (not the same as the port types themselves) USB Audio 1.0 (which works over USB 1.1 ports and supports up to 24-bit/96kHz) or USB Audio 2.0 (which requires a USB 2.0 port and can support up to 24-bit/192kHz). It will also work with the new USB 3.0 ports where the PC will simply treat the DacMagic Plus as if it were a USB 2.0 or 1.1 device. The DacMagic Plus is both USB 2.0 (Hi-Speed) and USB 1.1 (Full-speed) USB port compatible. Are you on the USB 1.1 or USB 2 settings? Below info is from the owners manual page 22.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |